注册

  Bug:  The ArcGIS Web Adaptor unregisters or loses its configuration and resets to the default or blank configuration

【相关信息】
Article ID: 43546
Bug Id: BUG-000083324
Software:
ArcGIS for Server 10.2, 10.2.1, 10.2.2
Web Adaptor for ArcGIS (Java Platform) 10.2
Platforms:
Windows Windows 8, Server 2012, Windows 7, Server 2008 R2, Windows 8.1, Server 2012 R2

【BUG描述】
The ArcGIS Web Adaptor unregisters or loses its configuration, and resets to the default or blank configuration in the webadaptor.config file.

【BUG原因】
The ArcGIS Web Adaptor sends periodic messages to verify connectivity to the ArcGIS Server. If there is a disconnect or loss of communication during these periodic messages, the web adaptor loses its configuration. This happens in most cases where communication may be across the network, but also less frequently when the Web Adaptor is installed on the same machine as the ArcGIS Server.
2015-11-30 添加评论
分享

没有找到相关结果

    已邀请:

    易智瑞技术支持

    赞同来自:

    【解决方案】

    This issue is resolved at ArcGIS for Server 10.3.

    If it is not possible to update the software to ArcGIS for Server 10.3, the issue can be resolved by retaining a copy of the webadaptor.config file.


    1. Install and configure the web adaptor. If necessary, refer to the links below for assistance with installation or setup of the web adaptor. Installing the ArcGIS Web Adaptor Configuring the ArcGIS Web Adaptor Once a copy of the webadaptor.config file is saved, it is no longer necessary to reinstall and reconfigure the web adaptor if the issue reoccurs.
    2. On the Web Adaptor machine, navigate to the following default location. C:\inetpub\wwwroot\arcgis\webadaptor.config
    3. Right-click the webadaptor.config file, and select Copy. Navigate to a secure location of choice and paste the webadaptor.config file to this location. A new folder can also be created. Name the folder and place the file in the following location. C:\inetpub\wwwroot\arcgis\
    4. If or when the issue occurs and the webadaptor.config loses its contents, restore the file from the copy created in Step 3. Navigate to the saved copy, right-click, and select Copy. Navigate to and paste over / replace the unregistered file. C:\inetpub\wwwroot\arcgis\webadaptor.config


    【创建及修改时间】
    Created: 12/4/2014

    Last Modified: 12/5/2014
    【原文链接】
    http://support.esri.com/en/kno ... 43546
    回复时间：2015-12-04 00:18:21 0 0
    分享
    为什么被折叠? 0 个回复被折叠

    要回复问题请先登录或注册


    Copyright © 2025